Temperature Humidity Set Point & Range

Please review our White Paper on Temperature Humidity Set Point & Range.

We designed this document after a misunderstanding with a client.

The client had requested a temperature range in the laboratory that would maintain between 16oC and 21oC, and less than 50% Relative Humidity.

After starting up the system and maintaining 20oC on an above design day with the 30kW load operating, we were all pleased with the performance.

The End User then explained that what they required was 3 days at 16oC and then rising by 1oC every 3 days, until it was at 21oC.

Luckily our condenser was oversized and we were able to change out the compressor, and meet the requirement 48 hours later.