TFP-5000

TFP-5000 – DIFFERENTIAL PRESSURE AIRFLOW PROBES

The TFP-5000 Airflow Measurement Probes have an extremely low YAW angle effect throughout the 30° range, an improved signal-to-noise ratio, and they generate an amplified differential pressure signal, improving the ability to make low velocity measurements.

Insertion Probes can easily http://localhost:8888/esc/wp-admin/post.php?post=536&action=editbe installed in either new or existing ductwork by cutting small entry holes in either side and installing the sensors across the duct area. Where the sensor must be removed for periodic inspection or cleaning, insertion probes provide an excellent measurement solution.

The TFP-5000 probes are manufactured in one-inch increments in lengths from four to 146 inches long, for rectangular, circular, and oval ductwork.

Achievable accuracies are typically within 2% of actual airflow.